Alphabet Crayons

You have kids, you have crayons, you end up having broken crayons, am I right?  Last week I bought a bunch of crayons thanks to a free deal through Target. I stockpiled. Well now I am thinking what am I going to do with 8 boxes of crayons plus the ones we already have.  My dear husband suggested the other day to take a box and melt them down into a few big crayons. Well I took his suggestion and made 3 larger crayons, but I also made some Alphabet crayons. Since Action Jackson knows most of his alphabet, he still needs help. I am hoping this helps.

What you need:

  • 24 pack of crayons (or a lot of broken pieces)
  • Alphabet mold (these can be found in the soap section of Michaels)
  • Muffin tin and liners

Step 1:

Preheat your oven to 350 degrees. Line your muffin tin with liners.

IMG_5268

Step 2:

Start removing the wrapper from all crayons. After doing several of these by just my fingernail, I had the bright idea to run them under hot water. This was much faster! As you remove the wrappers start breaking the crayons ( or using the broken ones) and placing the pieces into the muffin tin.

IMG_5269

IMG_5270

IMG_5271

IMG_5272

IMG_5273

Only have a few crayons in each liner for the alphabet (We refilled another time to make the whole alphabet)

IMG_5274

However, if you want big blocks for crayons fill the liners to almost the top.

Step 3:

Bake for the alphabet for roughly around 4 min.  Until they are all melted.

Bake for the larger crayons around 8-9 minutes. Until all is melted.

Step 4: 

For the alphabet: Once you remove your melted crayons from the oven, carefully pick up one liner at a time and pour it into the alphabet mold.  Allow them to cool completely in the mold. Repeat until the entire mold is full.

IMG_5275

Bottom, still allow to cool.

IMG_5276

Front.

For larger crayons: Allow the crayons to set for roughly 5 min. Remove from tin and allow to cool completely.

IMG_5283

Top

IMG_5282

Bottom.

Step 5:

For the alphabet:  Once the crayons are cooled flip the mold over and lightly push on the mold to release the crayons.

Step 6:

Enjoy!

IMG_5280

IMG_5278

IMG_5279

IMG_5281

Rocket Man!!!

I have seen this all over Pinterest for months thanks to Do It and How . I believe she is the originator, if not I apologize. But I went off of her design.

I don’t know of any Superhero that has a jet pack, but Jackson has decided to be Iron Man and Captain America today all while wearing the jet pack. I guess it makes him fly even faster?

What you need:

  • 2 empty 2 liters bottles
  • gray spray paint
  • elastic
  • cardboard
  • hot glue
  • Red and Yellow tissue paper
  • Aluminum foil
  • tape

Step 1:   

Spray paint your bottles and let dry. Good thing I painted my bottles almost 2 months ago and just never touched them. Some bottles have different textures than others. If you can get two of the same brand and kind it would be nice.

IMG_4626

Step 2:

Cut your “flames” out of tissue paper. You can also use felt or just about anything else.

IMG_4627

IMG_4628

After I cut the flames out, I taped the tops together.

Step 3:

Enter your flames into the the opening of the soda bottles. Hot glue on the tape part so that it doesn’t destroy the tissue.

IMG_4639

Step 4:

Get your cardboard (around 10.5 inches wide)

IMG_4630

Wrap your aluminum foil around your cardboard and tape the seams.

IMG_4634

Back

IMG_4635

Front

Step 5: 

Make your straps. Our straps were 12.5 inches long.

IMG_4629

Attach the elastic to the back of the cardboard using hot glue.

IMG_4636

Step 6:

Attach your soda bottles with hot glue on the back. Be careful not to use to much and melt the bottles.  Fill in the sides with hot glue.

IMG_4637

Step 7: 

BLAST OFF!!!! 

IMG_4640

IMG_4641

IMG_4642

IMG_4643

IMG_4644

IMG_4646

IMG_4647

Target Practice

**Warning this works best when no wind is present**

 

Are you ready for your little ones to work on some hand and eye coordination?  Target practice is a great way to practice just that.  Don’t worry no guns (or water guns) are used.

What you need:

  1. Spray Bottle (preferably one with a stream knob instead of spray)
  2. Ping Pong balls
  3. Golf Tees
  4. Foam Pool Noodle

AAA_9431

Step 1:

Cut about 2 feet off of your pool noodle. This will be your base for target practice.

AAA_9428

 

Step 2:

In as straight of line as possible  line up your golf tees horizontally across the pool noodle.

AAA_9432

 

 

Step 3:

Use two golf tees in the back  and on in the front, placed at a diagonal slant to insure the pool noodle doesn’t move.

AAA_9434

AAA_9437

 

 

Step 4:

Add your ping pong balls to the golf tees. **Remember this activity works best with no wind**

AAA_9440

 

 

Step 5: 

Have your child sit at various lengths away from the target with the spray bottle. The farther away they are the harder the targets will be to hit.

AAA_9445

AAA_9448

 

AAA_9455

AAA_9456

 

AAA_9457

AAA_9458

AAA_9459

AAA_9464

AAA_9470

AAA_9489

 

 

Now enjoy!  This is perfect for summer time. Caution for the backlash of giving a kid a spray bottle, you might just get wet yourself 😉

Let’s be a Prince (or a Princess)

A few weeks ago we took Jack to see Disney on Ice and it was all Princesses. Well I knew the place would be filled with all these little girls dressed as their favorite princess (BOY! WAS I RIGHT!) Well I didn’t want Jack to feel left out, so I made him a crown so he could be a prince for the evening. I  wanted to find a crown that was just right and and could be used more than once. So felt was automatically perfect for the occasion.

908598_10151542767055519_1689692291_n

Our family ❤

I didn’t take pictures of the making of this crown, but as luck would have it, a close friend of mine is having a baby boy in June so I made him a newborn sized crown with pictures!!

I will be showing 3 different crowns (1 boy and 2 girls)

For all of these you will need:

2 pieces for felt (same or contrasting colors)

thread

sewing machine

pattern

sharp scissors

The pattern I used for the newborns and Jackson’s crown I found at Hellobee . For this crown you will need some embroidery thread and needle.

Step 1: 

Lay out your crown pattern (remember this was for a newborn for newborns use once, for toddler cut the felt horizontally and use the pattern twice)

IMG_4021

IMG_4022

(for newborns use once, for toddler cut the felt horizontally and use the pattern twice)

Step 2:

Cut out your felt pieces and line them up. (using pins help while sewing)

IMG_4023

Step 3: 

Sew the 2 pieces together along all the edges. In the back where the pieces overlap cut down one triangle so that it will not be thicker than the others. Once you are done sewing go around with scissors and trim up your crown so that all edges meet perfectly. Use the embroidery thread at your back seam for added decoration.

IMG_4072

Congratulations you now have your own Prince Crown! Customize it as much as you want or leave it be.

Now for those Princesses! These crowns were made for the same little boy’s bigger sisters. Why not have a fairy tale family!

These patterns came from Cutesy Crafts . They are the exact same steps as the above crown so I will just show with pictures!

Step 1:

IMG_4035

IMG_4037

(You can see on the light pink where the main section of the crown I placed in the middle and along the top is the band for the back of the child’s head. I wanted the seams to be along the sides instead of the middle like the pattern showed.)

Step 2:

Cut it out!

IMG_4034

Step 3: SEW!!!

IMG_4073

IMG_4039

IMG_4074

I hope you princesses and prince enjoy a little dress up time this week!

Let’s Play with Shaving Cream!

There are so many different ways you can play with shaving cream. This week our shaving cream play time involved a tarp (left over from Outdoor Waterbed), shaving cream (we used 2 travel sized cans) and a little bit of water that was left over from rinsing the tarp off in the 1st place 🙂

After spraying on the shaving cream I just let Jackson go to town. It turned out to be a pretty cool slip n slide. We will definitely be doing this one again!  He had so much fun that all you could see was a smile on his face and hear the giggles in the air.  He even pretended to be a frog perched on top of his lilly pad.

Warning: very picture heavy! It just shows the excitement! 

AAA_7601

AAA_7605

AAA_7610

AAA_7614

We had to get mommy in on the action

AAA_7616

AAA_7622

AAA_7623

AAA_7627

AAA_7629

AAA_7632

AAA_7635

AAA_7636

AAA_7642

AAA_7645

AAA_7647

AAA_7651

AAA_7654

AAA_7655

AAA_7657

AAA_7659

AAA_7667

AAA_7668

AAA_7671

AAA_7676

AAA_7689

AAA_7690

AAA_7696

AAA_7701

Soda Volcano

Diet Coke and Mentos explode!  Did anyone else know that?  I didn’t until just the other day and decided we had to try it out. Of course we had to try it out on a day that daddy was home so he could actually get all sticky and I take pictures. This was a fun time. However, it is a shame that each bottle can only be used once. Also pouring the soda into smaller glasses in hopes for more activities doesn’t work. Both regular and diet coke work for this as you can see in the pictures.

All you need is a bottle of Diet Coke (or Coke) and a between 5-6 Mentos.

Here are our pictures!

AAA_7572

AAA_7579

AAA_7576

AAA_7580

AAA_7581

AAA_7582

AAA_7583

AAA_7584

AAA_7585 (our dog had to clean up the mess)

AAA_7588

AAA_7594

AAA_7597

AAA_7598

AAA_7599

AAA_7600

Wet and Wild!!!

WET AND WILD!!

Temperatures are staying pretty high down here in Miami! I love it! I love that I can tan pretty much year round.

But what do you when you wake up and little man wants to play but it is already hot out?

GET WATER BALLOONS GOING OF COURSE!

We didn’t actually use to many water balloons, I had gotten a variety pack of balloons from the Dollar Store

a while ago and decided to use the rest of them up. The others were used as a cave under our dining table (forgot to post that one!)

So I filled up probably a totally for 15 balloons, let me tell you what these things are hard to break.

We did a bullseye target, not much luck.

We tried hitting it off his T-ball tee, no luck!

We even tried to poke it with a shovel, nope!!!

I finally found a secret, throw it by where you tied it and hope it finds a small rock! hahah.

He was able to pop a few of them, but it was still fun trying new ways of popping them!

Yes he is still in his mouse ears from Disney! 

IMG_3573

IMG_3572

IMG_3571

IMG_3570

IMG_3569

IMG_3568

IMG_3567

IMG_3566

IMG_3565

IMG_3564

Ice Smashing!!!

This project is perfect in warmer weather, but since we live in Miami we can do it all year. 

Ice Smashing!  Everyone feels at some point in time if they just hit something they would feel so much better. Well children are the same way. They have to to release frustration, energy, or just think it is neat to break things.  This project is perfect for this.

What you need:

  1. Plastic mixing bowl – I use a medium to large but any size will do.
  2. Random toys- I use some Matchbox cars, alphabet magnets, dinosaurs. Things that don’t break easily when hit. 
  3. Hammer or Mallet. Depending on the age of you child and how you feel about you child playing with a hammer.
  4. Plenty of outdoor space or a patio so the sun helps melt the ice. ICE WILL FLY! 
  5. Optional:  Food Color, Glitter

Step 1:

   Fill your plastic mixing bowl 3/4 full of water. If you want to add food coloring and glitter now is the time to do it.

Step 2:

 Add your toys

Step 3:

Freeze overnight.  I usually cover the bowl with Press N Seal wrap.

Step 4:

  Go outside to the patio or where ever you plan on letting your child smash.

DSC_5145

Step 5:

 Place your bowl upside down and gently knock around the base to release the ice from the bowl.

DSC_5146

Step 6:

Have your child let their inner Hulk out and SMASH SMASH SMASH!!!!! 

DSC_5148

DSC_5147

DSC_5149

DSC_5150

DSC_5151

DSC_5153

DSC_5157

DSC_5159

DSC_5160

DSC_5161

DSC_5162

We did two bowls, a red and blue.

REMEMBER TO HAVE FUN!