Put me on a canvas!

To put pictures on canvas is expensive… or so we thought.  There is an easier way than buying the canvases from some online printing store…  DO IT YOURSELF!

Supplies needed: 

Blank canvas

A printed picture same size of the canvas.

Mod Podge

Foam Brush

 

Here’s How:

Step 1: Gather your supplies

 

IMG_6764

IMG_6765

IMG_6766

 

Step 2:

Place a layer of Mod Podge on the canvas. Then gently place your photograph on top of the canvas.

 

Step 3:

Add a layer of Mod Podge on top of the photograph. Make sure to get the edges. Once the 1st layer is dried, add a second. It will dry clear. When you add your Mod Podge brush it on in the same direction.

IMG_6767

IMG_6769

IMG_6768

It will dry clear when done.

Unfortunately I don’t have any pictures of the dried product. Will be updated.

 

 

Alphabet Crayons

You have kids, you have crayons, you end up having broken crayons, am I right?  Last week I bought a bunch of crayons thanks to a free deal through Target. I stockpiled. Well now I am thinking what am I going to do with 8 boxes of crayons plus the ones we already have.  My dear husband suggested the other day to take a box and melt them down into a few big crayons. Well I took his suggestion and made 3 larger crayons, but I also made some Alphabet crayons. Since Action Jackson knows most of his alphabet, he still needs help. I am hoping this helps.

What you need:

  • 24 pack of crayons (or a lot of broken pieces)
  • Alphabet mold (these can be found in the soap section of Michaels)
  • Muffin tin and liners

Step 1:

Preheat your oven to 350 degrees. Line your muffin tin with liners.

IMG_5268

Step 2:

Start removing the wrapper from all crayons. After doing several of these by just my fingernail, I had the bright idea to run them under hot water. This was much faster! As you remove the wrappers start breaking the crayons ( or using the broken ones) and placing the pieces into the muffin tin.

IMG_5269

IMG_5270

IMG_5271

IMG_5272

IMG_5273

Only have a few crayons in each liner for the alphabet (We refilled another time to make the whole alphabet)

IMG_5274

However, if you want big blocks for crayons fill the liners to almost the top.

Step 3:

Bake for the alphabet for roughly around 4 min.  Until they are all melted.

Bake for the larger crayons around 8-9 minutes. Until all is melted.

Step 4: 

For the alphabet: Once you remove your melted crayons from the oven, carefully pick up one liner at a time and pour it into the alphabet mold.  Allow them to cool completely in the mold. Repeat until the entire mold is full.

IMG_5275

Bottom, still allow to cool.

IMG_5276

Front.

For larger crayons: Allow the crayons to set for roughly 5 min. Remove from tin and allow to cool completely.

IMG_5283

Top

IMG_5282

Bottom.

Step 5:

For the alphabet:  Once the crayons are cooled flip the mold over and lightly push on the mold to release the crayons.

Step 6:

Enjoy!

IMG_5280

IMG_5278

IMG_5279

IMG_5281

Sensory Bins

Since sensory bins are everywhere it seems, Jackson and I decided make two today.

The 1st one all we did was mix water beads ( already hydrated) and shaving cream. He usually likes to play with shaving cream, today he just wasn’t into having his hands all dirty. I however did enjoy it. I love the feel of water beads, instant hand massage for me.  Shaving cream just gives it a little bit more friction.

AAA_1108

AAA_1109

AAA_1110

 

 

The second sensory bin we made used beans. We used black beans, red kidney beans, small red beans. I even added some cashews. Warning if they get wet they become slimy.  So you may not want to add them.  Jackson loved this one. He even put his Angry Birds and farm animals in to play.

AAA_1112

Let’s scoop them

AAA_1114

AAA_1116

AAA_1120

AAA_1125

AAA_1128

AAA_1127

Yum mommy!

AAA_1129

 

Even has to add some beans to the shaving cream.

AAA_1131

 

 

 

AAA_1132

 

Hello Angry Birds

AAA_1133

AAA_1144

AAA_1142

 

AAA_1136

 

Tornados!!!!!

Since here in the south we have had nothing but rain for the entire month of July, Jack and I decided to make a tornado.(Do you remember doing these in elementary school?) I’ve been wanting to do this project for a while and now I am kinda sad I waited. He is memorized by this.  It’s nice because his little hands are able to flip over the water bottles to form the tornado. I love the weather, I always have. It doesn’t help that my dad is meteorologist. (If you are looking for a new weather report thanks to hurricanes or anything else check it out here)
Jack and I need to do more weather activities.

 

How to make a tornado!

 

What you need:

  • 2 bottles – The smaller the bottles the smaller and shorter the tornado will be. We used 1.5L bottles. Clean and dry. 
  • Glitter Glue
  • Glitter
  • Monopoly house- we used 2 of the small green ones.
  • Duct Tape
  • Hot Glue
  • Food Coloring

IMG_4993

 

Step 1:

Fill one of your bottles 3/4th of the way with hot water.

IMG_4996

 

Step 2: 

Add 3-5 drops of food coloring to your water. Don’t go to dark otherwise you can not see.

IMG_4997

IMG_4999

 

Jackson got a little excited before this step and started playing with the food coloring before it was time.

IMG_4995

 

Step 3:

Add your glitter glue, glitter, and houses to mix everything together.

IMG_5001

IMG_5002

IMG_5004

IMG_5005

IMG_5009

IMG_5011

 

Step 4:

Add a bead of hot glue around the rim of one bottle. Then place your other bottle on top of the glue and continue to hot glue around the opening. Cover then with duct tape.

IMG_5013

IMG_5014

 

Step 5:

Shake and spin and turn upside down.. Watch your tornado pick up your house and your glitter become debris.

IMG_5015

IMG_5016

IMG_5021

 

 

After this all I heard was Again Again!! You know you are doing something right when your kid becomes excited over science!

Target Practice

**Warning this works best when no wind is present**

 

Are you ready for your little ones to work on some hand and eye coordination?  Target practice is a great way to practice just that.  Don’t worry no guns (or water guns) are used.

What you need:

  1. Spray Bottle (preferably one with a stream knob instead of spray)
  2. Ping Pong balls
  3. Golf Tees
  4. Foam Pool Noodle

AAA_9431

Step 1:

Cut about 2 feet off of your pool noodle. This will be your base for target practice.

AAA_9428

 

Step 2:

In as straight of line as possible  line up your golf tees horizontally across the pool noodle.

AAA_9432

 

 

Step 3:

Use two golf tees in the back  and on in the front, placed at a diagonal slant to insure the pool noodle doesn’t move.

AAA_9434

AAA_9437

 

 

Step 4:

Add your ping pong balls to the golf tees. **Remember this activity works best with no wind**

AAA_9440

 

 

Step 5: 

Have your child sit at various lengths away from the target with the spray bottle. The farther away they are the harder the targets will be to hit.

AAA_9445

AAA_9448

 

AAA_9455

AAA_9456

 

AAA_9457

AAA_9458

AAA_9459

AAA_9464

AAA_9470

AAA_9489

 

 

Now enjoy!  This is perfect for summer time. Caution for the backlash of giving a kid a spray bottle, you might just get wet yourself 😉

Let’s Play with Shaving Cream!

There are so many different ways you can play with shaving cream. This week our shaving cream play time involved a tarp (left over from Outdoor Waterbed), shaving cream (we used 2 travel sized cans) and a little bit of water that was left over from rinsing the tarp off in the 1st place 🙂

After spraying on the shaving cream I just let Jackson go to town. It turned out to be a pretty cool slip n slide. We will definitely be doing this one again!  He had so much fun that all you could see was a smile on his face and hear the giggles in the air.  He even pretended to be a frog perched on top of his lilly pad.

Warning: very picture heavy! It just shows the excitement! 

AAA_7601

AAA_7605

AAA_7610

AAA_7614

We had to get mommy in on the action

AAA_7616

AAA_7622

AAA_7623

AAA_7627

AAA_7629

AAA_7632

AAA_7635

AAA_7636

AAA_7642

AAA_7645

AAA_7647

AAA_7651

AAA_7654

AAA_7655

AAA_7657

AAA_7659

AAA_7667

AAA_7668

AAA_7671

AAA_7676

AAA_7689

AAA_7690

AAA_7696

AAA_7701

Soda Volcano

Diet Coke and Mentos explode!  Did anyone else know that?  I didn’t until just the other day and decided we had to try it out. Of course we had to try it out on a day that daddy was home so he could actually get all sticky and I take pictures. This was a fun time. However, it is a shame that each bottle can only be used once. Also pouring the soda into smaller glasses in hopes for more activities doesn’t work. Both regular and diet coke work for this as you can see in the pictures.

All you need is a bottle of Diet Coke (or Coke) and a between 5-6 Mentos.

Here are our pictures!

AAA_7572

AAA_7579

AAA_7576

AAA_7580

AAA_7581

AAA_7582

AAA_7583

AAA_7584

AAA_7585 (our dog had to clean up the mess)

AAA_7588

AAA_7594

AAA_7597

AAA_7598

AAA_7599

AAA_7600